| Availability: | |
|---|---|
| Quantity: | |
Two-shear and multi-punch high-speed intelligent cross-cutting line [Model: CAH(2XX)-400/600/800/1000PT]
1. Overview of the production line
1.1 The equipment adopts a central positioning system and is equipped with two shears and four punches.
1.2 One 45º shearing machine, and one 135º shearing machine.
1.3 Two V punching and shearing machines are used; the servo motor control system realizes lateral movement;.
1.4 The punching machine adopts servo motor control system to realize horizontal movement and vertical fixation.
1.5 The back-suction neat material sorting system is adopted to realize neat or step-by-step material sorting.
2. Production line functions and characteristics
2.1 It has vertical and horizontal step cutting function.
2.2 Equipped with full sequence shearing function, it is helpful to improve core performance.
2.3 It adopts a back-suction neat material sorting system, with neat palletizing, a maximum of nine steps, and also has palletizing functions such as skip stepping and unequal length stepping.
2.4 All punching and shearing and traversing movements of the punching and shearing machine are driven by servo motors and have an intelligent control system, making the operation easy and reliable.
2.5 All synchronous structures involved in the transmission mechanism use synchronous belts and do not use chain structures.
2.6 The unwinding machine uses a hydraulic control system to automatically tighten the roll and rotate the machine head.
2.7 The unwinding system uses multiple sets of photoelectric switches to control the speed and has flexible buffering acceleration and deceleration functions.
2.8 The feeding system has the function of monitoring and stopping sheet defects (wrinkles, etc.).
2.9 The film transport track adopts a precise positioning assembly structure, using open C-shaped guide rails designed as standard parts, and processed into a smooth surface to effectively avoid damage to the silicon steel sheets; the feeder guide rails, punch section guide rails, shear section guide rails, bearings and other transmission mechanisms are made of non-magnetic steel plates, and the hardness of the contact surface with silicon steel reaches HRC60-70. The track strip is designed with two working surfaces, which can be used repeatedly and are easy to replace, reducing the user"s maintenance costs for the equipment. (The track bearings are made of ceramic material)
2.10 It is equipped with front and rear two-stage conveying mechanisms to transport materials synchronously to avoid waves during sheet material transportation, which not only improves shearing accuracy but also reduces sheet material damage caused by friction.
2.11 The fully electric roller output table is used to realize the output of finished materials without stopping the machine.
2.12 A waste conveying mechanism is set up to facilitate centralized recycling of punching and shearing waste.
2.13 The equipment adopts top brand control systems and servo systems such as Siemens from Germany.
2.14 Humanized operation interface, anthropomorphic interface model, easy operation, automatic saving of slice plans.
2.15 It has a special program for splicing materials. Taking into account the possibility that the second roll material head and the first roll material tail are connected, the material saving mode can be calculated for selection/confirmation.
2.16 Necessary control buttons are set at the feeding, scissors, and material dividing positions to facilitate nearby control of the equipment; the main control is placed near the feeding, using a cantilever-type adjustable bracket.
2.17 Equipped with remote diagnosis network modules and assistance services, engineers can remotely monitor and diagnose equipment program status online at the first time, assist manufacturers in timely and effective handling of on-site faults and program update operations, and minimize downtime.
2.18 The equipment is fully equipped with photoelectric alarm safety devices to fully protect the safety of equipment operators.
2.19 There is a step-by-step platform on the operating side of the rack to facilitate access to upper materials.
2.20 Equipped with an elevated bracket for the electrical cabinet to facilitate the waste belt to pass under the electrical cabinet
content is empty!